H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 646)

67-4
Displaying and Maintaining HTTPS
To do… Use the command… Remarks
Display information about HTTPS display ip https Available in any view
HTTPS Configuration Example
Network requirements
z
Host acts as the HTTPS client and AC acts as the HTTPS server.
z
Host accesses AC through Web to control AC.
z
CA (Certificate Authority) issues certificate to AC. The common name of CA is new-ca.
In this configuration example, Windows Server serves as CA and you need to install Simple Certificate
Enrollment Protocol (SCEP) component.
Network diagram
Figure 67-1 Network diagram for HTTPS configuration
Vlan-int2
10.1.1.1/24
Vlan-int3
10.1.2.1/24
Host CA
10.1.1.2/24 10.1.2.2/24
AC
Configuration procedure
Perform the following configurations on AC:
1) Apply for a certificate for AC
# Configure a PKI entity.
system-view
[AC] pki entity en
[AC-pki-entity-en] common-name http-server1
[AC-pki-entity-en] fqdn ssl.security.com
[AC-pki-entity-en] quit
# Configure a PKI domain.
[AC] pki domain 1
[AC-pki-domain-1] ca identifier ca1
[AC-pki-domain-1] certificate request url http://10.1.2.2:8080/certsrv/mscep/mscep.dll
[AC-pki-domain-1] certificate request from ra