H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 277)

25-43
[SwitchB-ospf-1-area-0.0.0.1] quit
[SwitchB-ospf-1] quit
It is recommended to configure the nssa command with the keyword default-route-advertise
no-summary on AC (an ABR) to reduce the routing table size on NSSA routers. On other NSSA routers,
using the nssa command is ok.
# Display OSPF routing information on Switch B.
[SwitchB] display ospf routing
OSPF Process 1 with Router ID 10.4.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
0.0.0.0/0 65536 Inter 10.2.1.1 10.2.1.1 0.0.0.1
10.2.1.0/24 65535 Transit 10.2.1.2 10.4.1.1 0.0.0.1
10.4.1.0/24 3 Stub 10.4.1.1 10.4.1.1 0.0.0.1
Total Nets: 3
Intra Area: 2 Inter Area: 1 ASE: 0 NSSA: 0
4) Configure Switch B to redistribute static routes.
[SwitchB] ip route-static 3.1.3.1 24 11.1.1.1
[SwitchB] ospf
[SwitchB-ospf-1] import-route static
[SwitchB-ospf-1] quit
# Display OSPF routing information on Switch C.
[SwitchC-ospf-1] display ospf routing
OSPF Process 1 with Router ID 10.5.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.2.1.0/24 22 Inter 10.3.1.1 10.3.1.1 0.0.0.2
10.3.1.0/24 10 Transit 10.3.1.2 10.3.1.1 0.0.0.2
10.4.1.0/24 25 Inter 10.3.1.1 10.3.1.1 0.0.0.2
10.5.1.0/24 10 Stub 10.5.1.1 10.5.1.1 0.0.0.2
10.1.1.0/24 12 Inter 10.3.1.1 10.3.1.1 0.0.0.2
Routing for ASEs
Destination Cost Type Tag NextHop AdvRouter
3.1.3.0/24 1 Type2 1 10.3.1.1 10.2.1.1
Total Nets: 6