H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 39)

2-9
To do… Use the command… Remarks
Enter the
default ISP
domain view
domain domain-name
Configure the
AAA scheme to
be applied to
the domain
authentication default
{ hwtacacs-scheme
hwtacacs-scheme- name
[ local ] | local | none |
radius-scheme
radius-scheme-name [ local ] }
Configu
re the
authenti
cation
scheme
Quit to system
view
quit
Optional
By default, the local AAA scheme is applied. If
you specify to apply the local AAA scheme,
you need to perform the configuration
concerning local user as well.
If you specify to apply an existing scheme by
providing the radius-scheme-name argument,
you need to perform the following
configuration as well:
z
Perform AAA&RADIUS configuration on
the access controller switch interface
board. (Refer to
AAA-RADIUS-HWTACACS Configuration
for more.)
z
Configure the user name and password
accordingly on the AAA server. (Refer to
the user manual of AAA server.)
Create a local user and
enter local user view
local-user user-name No local user exists by default.
Set the authentication
password for the local user password { simple | cipher }
password
Required
Specify the service type for
VTY users service-type telnet [ level
level ]
Required
Quit to system view quit —
Enter one or more VTY
user interface views user-interface vty first-number
[ last-number ]
—
Configure to authenticate
users locally or remotely authentication-mode scheme
[ command- authorization ]
Required
The specified AAA scheme determines
whether to authenticate users locally or
remotely.
Users are authenticated locally by default.
Configure the command
level available to users
logging in to the user
interface
user privilege level level
Optional
By default, commands of level 0 are available
to users logging in to the VTY user interfaces.
Configure the supported
protocol protocol inbound { all | ssh |
telnet }
Optional
Both Telnet protocol and SSH protocol are
supported by default.
Set the command that is
automatically executed
when a user logs into the
user interface
auto-execute command text
Optional
By default, no command is automatically
executed when a user logs into a user
interface.
Define a shortcut key for
aborting tasks escape-key { default |
character }
Optional
The default shortcut key combination for
aborting tasks is Ctrl+C.
Make terminal services
available
shell
Optional
Terminal services are available in all use
interfaces by default.