Displaying and maintaining ftp – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 538
57-9
z
When upgrading the configuration file with FTP, put the new file under the root directory.
z
After you finish upgrading the Boot ROM program through FTP, you must execute the bootrom
upgrade
command to refresh the system configuration.
# You can use the boot-loader command to specify the uploaded file as the main startup file for next
startup. Then restart the device and the startup file of the device is updated.
Startup files for next startup must be saved under the root directory. You can copy or move a file to
change the path of it to the root directory. For description of the corresponding command, refer to the
System Maintaining and Debugging
in H3C WX6103 Access Controller Switch Interface Board
Configuration Guide
.
Displaying and Maintaining FTP
To do…
Use the command…
Remarks
Display the configuration of the
FTP client
display ftp client configuration
Available in any view
Display the configuration of the
FTP server
display ftp-server
Available in any view
Display detailed information about
logged-in FTP users
display ftp-user
Available in any view