H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 577)

62-2
To do… Use the command… Remarks
Enable the scheduled reboot function
and specify a specific reboot time
and date
schedule reboot at hh:mm
[ date ]
Enable the scheduled reboot function
and specify a reboot waiting time schedule reboot delay { hh:mm
| mm }
Optional
The scheduled reboot function is
disabled by default.
Execute the command in user
view.
z
The precision of the rebooting timer is 1 minute. One minute before the rebooting time, the device
will prompt “REBOOT IN ONE MINUTE” and will reboot in one minute.
z
The execution of the reboot, schedule reboot at, and schedule reboot delay commands can
reboot a device. As a result, the ongoing services will be interrupted. Be careful to use these
commands.
z
If a primary boot file fails or does not exist, the device cannot be rebooted with this command. In
this case, you can re-specify a primary boot file to reboot the device, or you can power off the
device then power it on and the system automatically uses the secondary boot file to restart the
device.
z
Make sure that either the primary or the backup boot file or both are in normal use, when using the
schedule reboot command to enable the scheduled reboot function.
z
If you are performing file operations when the device is to be rebooted, the system does not
execute the command for the sake of security.
Specifying a Boot ROM File for the Next Device Boot
A Boot ROM file is an application file used to boot the device. When multiple Boot ROM files are
available on the storage device, you can specify a file for the next device boot by executing the following
command.
Follow these steps to specify a file for the next device boot:
To do… Use the command… Remarks
Specify a boot file for the device
boot-loader file file -url { main |
backup }
Required
Available in user view,
The file for the next device boot must be saved under the root directory of the device (for a device
supporting storage device partition, the file must be saved on the first partition). You can copy or move
a file to change the path of it to the root directory.