46 congestion management, Overview, Congestion management policy – H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 441: 1 congestion management policy, Congestion management
46-1
46
Congestion Management
When configuring congestion management, go to these section for information that you are interested
in:
z
z
z
z
z
z
Displaying and Maintaining Congestion Management
Overview
When the rate at which the packets arrive is higher than the rate at which the packets are transmitted on
an interface, congestion occurs on this interface. If there is not enough storage space to store these
packets, parts of them will be lost. Packet loss may cause the transmitting device to retransmit the
packets because the lost packets time out, which causes a malicious cycle.
The core of congestion management is how to schedule the resources and determine the sequence of
forwarding packets when congestion occurs.
Congestion Management Policy
Queuing technology is generally adopted to solve the congestion problem. The queuing technology is to
classify the traffic according to a specified queue-scheduling algorithm and then use the specified
priority algorithm to forward the traffic. Each queuing algorithm is used to solve specific network traffic
problems and affects the parameters such as bandwidth allocation, delay and delay jitter.
The following paragraphs describe strict-priority (SP) queue-scheduling algorithm, and weighted round
robin (WRR) queue-scheduling algorithm.
1) SP queue-scheduling algorithm