H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 619)

64-14
[AC-luser-client001] password simple aabbcc
[AC-luser-client001] service-type ssh level 3
[AC-luser-client001] quit
# Specify the service type for user client001 as Stelnet, and the authentication method as
password.
[AC] ssh user client001 service-type stelnet authentication-type password
2) Configure the SSH client
There are a variety of SSH client software, such as PuTTY, OpenSSH, and so on. The following is an
example of configuring SSH client using PuTT v0.58.
# Establish a connection with the SSH server
Launch PuTTY.exe to enter the following interface. In the Host Name (or IP address) text box, enter
the IP address of the server (192.168.1.40).
Figure 64-3 SSH client configuration interface
From the window shown in Figure 64-3 , click Open. If the connection is normal, you will be prompted to
enter the username (client001) and password (aabbcc).