beautypg.com

Configuration procedure – H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 468

background image

51-3

Configuration procedure

The following configuration assumes that a route from AC to the network segment 10.2.0.0/16 is
available.

# Enable UDP Helper.

system-view

[AC] udp-helper enable

# Enable the forwarding broadcast packets with the UDP destination port number 55.

[AC] udp-helper port 55

# Specify the server with the IP address of 10.2.1.1 as the destination server to which UDP packets are
to be forwarded.

[AC] interface vlan-interface 1

[AC-Vlan-interface1] ip address 10.110.1.1 16

[AC-Vlan-interface1] udp-helper server 10.2.1.1

See also other documents in the category H3C Technologies Routers: