H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 548)

59-6
Task Remarks
Setting to Output System Information to the Trap Buffer Optional
Setting to Output System Information to the Log Buffer Optional
Setting to Output System Information to the SNMP NMS Optional
Configuring Synchronous Information Output Optional
Setting to Output System Information to the Console
Setting to output system information to the console
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 59-2 for default
channel names.
Configure the channel through
which system information can be
output to the console
info-center console channel
{ channel-number | channel-name }
Optional
System information is output to the
console by default, with channel 0
as the default channel.
Configure the output rules of
system information
info-center source
{ module-name | default } channel
{ channel-number | channel-name }
[ debug { level severity | state
state
} * | log { level severity | state
state } * | trap { level severity |
state state } * ] *
Optional
Refer to
Table 59-4 for the default
output rules of system information.
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap } { boot |
date
| none }
Optional
The time stamp format for log, trap
and debugging information is date
by default.
Table 59-4 Default output rules for different output destinations
LOG TRAP DEBUG
Output
destinatio
n
Modules
allowed Enabled/d
isabled
Severity
Enabled/d
isabled
Severity
Enabled/d
isabled
Severity
Console
default (all
modules)
Enabled warnings Enabled debugging Enabled debugging
Monitoring
terminal default (all
modules)
Enabled warnings Enabled debugging Enabled debugging
Log host
default (all
modules)
Enabled
information
al
Enabled debugging Disabled debugging
Trap buffer
default (all
modules)
Disabled
information
al
Enabled warnings Disabled debugging
Log buffer
default (all
modules)
Enabled warnings Disabled debugging Disabled debugging