H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 516)

55-6
round-trip min/avg/max = 2/2/2 ms
Dynamic Domain Name Resolution Configuration Example
Network requirements
z
The IP address of the DNS server is 2.1.1.2/16 and the name suffix is com.
z
AC serving as a DNS client uses the dynamic domain name resolution and the suffix to access the
host with the domain name host.com and the IP address 3.1.1.1/16.
Network diagram
Figure 55-4 Network diagram for dynamic domain name resolution
Configuration procedure
z
Before performing the following configuration, make sure that there is a route between the device
and the host, and configurations are done on both the device and the host. For the IP addresses of
the interfaces, see
Figure 55-4 .
z
This configuration may vary with different DNS servers. The following configuration is performed on
a Windows 2000 server.
1) Configure the DNS server
# Enter DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS.
# Create zone com.
In Figure 55-5 , right click Forward Lookup Zones, select New zone, and then follow the instructions to
create a new zone.