H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 390)

36-10
Analysis
Some problems may occur with the DHCP relay agent or server configuration. Enable debugging and
execute the display command on the DHCP relay agent to view the debugging information and
interface state information for locating the problem.
Solution
Check that:
z
The DHCP is enabled on the DHCP server and relay agent.
z
The address pool on the same subnet where DHCP clients reside is available on the DHCP server.
z
The routes between the DHCP server and DHCP relay agent are reachable.
z
The relay agent interface connected to DHCP clients is correlated with correct DHCP server group
and IP addresses for the group members are correct.