H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 448)

47-2
Imported priority value dot1p-lp mapping dot1p-dp mapping
1 0 0
2 1 0
3 3 0
4 4 0
5 5 0
6 6 0
7 7 0
Table 47-2 The default values of dscp-dp mapping, dscp-dot1p mapping, and dscp-dscp mapping
Imported priority value dscp-dp mapping dscp-dot1p mapping dscp-dscp mapping
DSCP precedence
(dscp)
Drop precedence (dp)
802.1p precedence
(dot1p) DSCP precedence
(dscp)
0 to 7 0 0 0
8 to 15 0 1 8
16 to 23 0 2 16
24 to 31 0 3 24
32 to 39 0 4 32
40 to 47 0 5 40
48 to 55 0 6 48
56 to 63 0 7 56
You cannot configure to map any DSCP value to drop precedence 1.
Configuring a Priority Mapping Table
You can modify the priority mapping tables in a switch as required.
Follow the two steps to configure priority mapping tables:
z
Enter priority mapping table view;
z
Configure priority mapping parameters.
Configuration Prerequisites
The new priority mapping table is determined.
Configuration Procedure
Follow these steps to configure a priority mapping table: