H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 208)

21-6
To do… Use the command… Remarks
Display the information of recursive
routes
display ip relay-route
Display IPv6 recursive route
information
display ipv6 relay-route
Display brief IPv6 routing table
information
display ipv6 routing-table
Display verbose IPv6 routing table
information
display ipv6 routing-table verbose
Display routing information for a
specified destination IPv6 address display ipv6 routing-table ipv6-address
prefix-length [ longer-match ] [ verbose ]
Display routing information
permitted by an IPv6 ACL display ipv6 routing-table acl acl6-number
[ verbose ]
Display routing information
permitted by an IPv6 prefix list display ipv6 routing-table ipv6-prefix
ipv6-prefix-name [ verbose ]
Display IPv6 routing information of
a routing protocol display ipv6 routing-table protocol
protocol [ inactive | verbose ]
Display IPv6 routing statistics display ipv6 routing-table statistics
Display IPv6 routing information for
an IPv6 address range
display ipv6 routing-table ipv6-address1
prefix-length1 ipv6-address2 prefix-length2
[ verbose ]
Available in any view
Clear specified IPv6 routing table
statistics reset ipv6 routing-table statistics
protocol
{ all | protocol }
Available in user view