H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 471)

52-3
B can be uniquely identified by a string of numbers {1.2.1.1}. This string of numbers is the OID of the
managed object B.
Figure 52-2 MIB tree
A
2
6
1
5
2 1
1
2
1
B
SNMP Configuration
As configurations for SNMPv3 differ substantially from those of SNMPv1 and SNMPv2c, their SNMP
functionalities will be introduced separately below.
Follow these steps to configure SNMPv3:
To do… Use the command… Remarks
Enter system view system-view —
Enable SNMP Agent snmp-agent
Optional
Disabled by default
You can enable SNMP Agent
through this command or any
commands that begin with
snmp-agent
.
Configure SNMP Agent system
information
snmp-agent sys-info { contact
sys-contact | location sys-location
| version { all | { v1 | v2c | v3 }* } }
Optional
The defaults are as follows:
Hangzhou H3C Tech. Co., Ltd. for
contact,
Hangzhou, China for location, and
SNMP v3 for the version.
Configure an SNMP agent group
snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ] [ acl
acl-number
]
Required
Convert the user-defined plain text
password to a cipher text password
snmp-agent calculate-password
plain-password mode { md5 |
sha } { local-engineid |
specified-engineid string }
Optional
Add a new user to an SNMP agent
group
snmp-agent usm-user v3
user-name group-name [ [ cipher ]
authentication-mode { md5 |
sha } auth-password
[ privacy-mode { aes128 | des56 }
priv-password
] ] [ acl acl-number ]
Required
If the cipher keyword is specified,
the arguments auth-password and
priv-password
are considered as
cipher text password.