H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 574)

61-3
System Maintaining and Debugging
System Maintaining
To do… Use the command… Remarks
ping [ ip ] [ -a source-ip | -c count | -f | -h ttl | -i
interface-type interface-number | -m interval | -n |
-p pad | -q | -r | -s packet-size | -t timeout | -tos tos
| -v ] * remote-system
Optional
Used in IPv4 network
Available in any view
Check whether a
specified IP
address can be
reached
ping ipv6 [ -a source-ipv6 | -c count | -m interval |
-s packet-size | -t timeout ] * remote-system [ -i
interface-type interface-number ]
Optional
Used in IPv6 network
Available in any view
tracert [ -a source-ip | -f first-ttl | -m max-ttl | -p port
| -q packet-number | -w timeout ] * remote-system
Optional
Used in IPv4 network
Available in any view
View the routes
from the source to
the destination
tracert ipv6 [ -f first-ttl | -m max-ttl | -p port | -q
packet-number | -w timeout ] * remote-system
Optional
Used in IPv6 network
Available in any view
z
For a low-speed network, you are recommended to set a larger value for the timeout timer
(indicated by the -t parameter in the command) when configuring the ping command.
z
Only the directly connected segment address can be pinged if the outgoing interface is specified
with the -i argument.
System Debugging
To do… Use the command… Remarks
Enable the terminal monitoring of
system information
terminal monitor
Optional
The terminal monitoring on the
console is enabled by default and
that on the monitoring terminal is
disabled by default.
Enable the terminal display of
debugging information
terminal debugging
Required
Disabled by default
Available in user view
Enable debugging for a specified
module debugging { all [ timeout time ] |
module-name [ option ] }
Required
Disabled by default
Available in user view
Display the enabled debugging
functions
display debugging [ interface
interface-type interface-number ]
[ module-name ]
Optional
Available in any view