H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 200

20-42

# Configure the region name, VLAN-to-instance mappings and revision level of the MST region.

[AC A-mst-region] region-name example

[AC A-mst-region] instance 1 vlan 10

[AC A-mst-region] instance 3 vlan 30

[AC A-mst-region] instance 4 vlan 40

[AC A-mst-region] revision-level 0

# Activate MST region configuration manually.

[AC A-mst-region] active region-configuration

[AC A-mst-region] quit

# Define AC A as the root bridge of MST instance 1.

[AC A] stp instance 1 root primary

# View the MST region configuration information that has taken effect.

[AC A] display stp region-configuration

Oper configuration

Format selector :0

Region name :example

Revision level :0

Instance Vlans Mapped

0 1 to 9, 11 to 29, 31 to 39, 41 to 4094

1 10

3 30

4 40

2) Configuration on AC B

# Enter MST region view.

system-view

[AC B] stp region-configuration

# Configure the region name, VLAN-to-instance mappings and revision level of the MST region.

[AC B-mst-region] region-name example

[AC B-mst-region] instance 1 vlan 10

[AC B-mst-region] instance 3 vlan 30

[AC B-mst-region] instance 4 vlan 40

[AC B-mst-region] revision-level 0

# Activate MST region configuration manually.

[AC B-mst-region] active region-configuration

[AC B-mst-region] quit

# Define AC B as the root bridge of MST instance 3.

[AC B] stp instance 3 root primary