H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 621)

64-16
# Specify the authentication type for user “client002” as publickey, and assign the public key “AC001” for
the user.
[AC] ssh user client002 service-type stelnet authentication-type publickey assign publickey
AC001
2) Configure the SSH client
# Generate an RSA key pair
Run PuTTYGen.exe, choose SSH2-(RSA) and click Generate.
Figure 64-5 Generate a client key pair (1)
While generating the key pair, you must move the mouse continuously and keep the mouse off the
green process bar shown in
Figure 64-6 . Otherwise, the process bar stops moving and the key pair
generating process is stopped.