H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 521)

56-1
56
File System Management Configuration
z
The term switch in this document refers to a switch in a generic sense or an access controller
configured with the switching function unless otherwise specified.
z
Throughout this document, a filename can be entered as either of the following: A fully qualified
filename with the path included to indicate a file under a specific path. The filename can be 1 to 135
characters in length; A short filename with the path excluded to indicate a file in the current path.
The filename can be 1 to 91 characters in length.
When configuring the file system management, go to these sections for information you are interested
in:
z
File System Management
z
Configuration File Management
z
Displaying and Maintaining Device Configuration
File System Management
This section covers these topics:
z
File System Overview
z
Directory Operations
z
File Operations
z
Storage Device Operations
z
File System Prompt Mode Setting
z
File System Operations
File System Overview
A major function of the file system is to manage storage devices. It allows you to perform operations
such as directory create and delete, and file copy and display. If an operation, delete or overwrite for
example, may cause problems such as data loss or corruption, the file system will ask you to confirm
the operation by default.
Depending on the managed object, file system operations fall into Directory Operations , File Operations ,
Storage Device Operations , and File System Prompt Mode Setting .