H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 561)

60-3
Configuration
System clock displayed by the
display clock command
Example
[1], 2 and 1 date-time
Configure: clock timezone zone-time add 1 and
clock datetime 3:00 2007/3/3
Display: 03:00:00 zone-time Sat 03/03/2007
If the original system clock is not in
the summer time range, the original
system clock is displayed. Configure: clock summer-time ss one-off 1:00
2006/1/1 1:00 2006/8/8 2
Display: 01:00:00 UTC Sat 01/01/2005
3
If the original system clock is in the
summer time range, the original
system clock + summer-offset is
displayed.
Configure: clock summer-time ss one-off 00:30
2005/1/1 1:00 2005/8/8 2
Display: 03:00:00 ss Sat 01/01/2005
If date-time is not in the summer
time range, date-time is displayed.
Configure: clock datetime 1:00 2007/1/1 and
clock summer-time ss one-off 1:00 2006/1/1
1:00 2006/8/8 2
Display: 01:00:00 UTC Mon 01/01/2007
1 and 3
If date-time is in the summer time
range, “date-time” +
“summer-offset” is displayed.
Configure: clock datetime 8:00 2007/1/1 and
clock summer-time ss one-off 1:00 2007/1/1
1:00 2007/8/8 2
Display: 10:00:00 ss Mon 01/01/2007
If date-time is not in the summer
time range, date-time is displayed.
Configure: clock summer-time ss one-off 1:00
2007/1/1 1:00 2007/8/8 2 and clock datetime
1:00 2008/1/1
Display: 01:00:00 UTC Tue 01/01/2008
Configure: clock summer-time ss one-off 1:00
2007/1/1 1:00 2007/8/8 2 and clock datetime
1:30 2007/1/1
Display: 23:30:00 UTC Sun 12/31/2006
[1], 3 and 1
date-time is in the summer time
range:
If the value of “date-time” -
“summer-offset”
is not in the
summer-time range, “date-time” -
“summer-offset”
is displayed;
If the value of “date-time” -
“summer-offset”
is in the
summer-time range, date-time is
displayed.
Configure: clock summer-time ss one-off 1:00
2007/1/1 1:00 2007/8/8 2 and clock datetime
3:00 2007/1/1
Display: 03:00:00 ss Mon 01/01/2007
Configure: clock timezone zone-time add 1 and
clock summer-time ss one-off 1:00 2007/1/1
1:00 2007/8/8 2
Display: 02:00:00 zone-time Sat 01/01/2005
If the value of the original system
clock
± “zone-offset” is not in the
summer-time range, the original
system clock
± “zone-offset” is
displayed.
Configure: clock timezone zone-time add 1 and
clock summer-time ss one-off 1:00 2005/1/1
1:00 2005/8/8 2
Display: 04:00:00 ss Sat 01/01/2005
2 and 3 or 3 and 2
If the value of the original system
clock
± “zone-offset” is in the
summer-time range, the original
system clock
± “zone-offset”
+ ”summer-offset” is displayed.
Configure: clock datetime 1:00 2007/1/1, clock
timezone zone-time add 1 and clock
summer-time ss one-off 1:00 2008/1/1 1:00
2008/8/8 2
Display: 02:00:00 zone-time Mon 01/01/2007