beautypg.com

Configuration procedure, Configuration example – H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 438

background image

45-4

Configuration procedure

Follow these steps to define a traffic behavior:

To do…

Use the command…

Remarks

Enter system view

system-view

Create a traffic behavior and enter
the corresponding traffic behavior
view

traffic behavior behavior-name

Required

behavior-name

: Behavior

name. This operation
leads you to traffic
behavior view

Configure accounting action

accounting

Configure traffic policing action

car cir committed-information-rate

[ cbs

committed-burst-size

[ ebs

excess-burst-size

] ] [ pir

peak-information-rate

] [ green action ] [ red

action

] [ yellow action ]

Configure traffic filtering behavior

filter

{ deny | permit }

Configure traffic mirroring action

mirror-to

{ cpu | interface interface-type

interface-number

}

Configure nested VLAN tag action

nest top-most vlan-id vlan-id

Configure traffic redirect action

redirect

{ cpu | interface interface-type

interface-number

| link-aggregation group

agg-id | next-hop

{ ipv4-add [ ipv4-add ] |

ipv6-add

[ interface-type interface-number ]

[ ipv6-add [ interface-type
interface-number

] ] } }

Remark the customer network
VLAN ID for packets

remark

customer-vlan-id vlan-id-value

Remark DSCP value for packets

remark dscp

dscp-value

Remark 802.1p precedence for
packets

remark dot1p

8021p

Remark drop precedence for
packets

remark drop-precedence

drop-precedence-value

Remark IP precedence for packets

remark ip-precedence

ip-precedence-value

Remark local precedence for
packets

remark local-precedence

local-precedence

Remark the service provider
network VLAN ID for packets

remark service-vlan-id

vlan-id-value

Required
You can configure the
traffic behavior as
required.

Configuration example

1) Network

requirements

Create a traffic behavior named test, configuring traffic policing action for it, with the CAR being 640
kbps.

2) Configuration

procedure

# Enter system view.

system-view

# Create the traffic behavior (This operation leads you to traffic behavior view).

[Sysname] traffic behavior test