H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 152)

19-13
1) Configure the RADIUS protocol
# Create a RADIUS scheme named radsun.
system-view
[AC] radius scheme radsun
# Set the IP addresses of the primary authentication and accounting servers to 192.168.1.1 and
192.168.1.2 respectively.
[AC-radius-radsun] primary authentication 192.168.1.1
[AC-radius-radsun] primary accounting 192.168.1.2
# Set the IP addresses of the secondary authentication and accounting servers to 192.168.1.2 and
192.168.1.1 respectively.
[AC-radius-radsun] secondary authentication 192.168.1.2
[AC-radius-radsun] secondary accounting 192.168.1.1
# Set the encryption key for the switch to use when interacting with the authentication server to name.
[AC-radius-radsun] key authentication name
# Set the encryption key for the switch to use when interacting with the accounting server to money.
[AC-radius-radsun] key accounting money
# Set the RADIUS server response timeout time to five seconds and the maximum number of RADIUS
packet retransmission attempts to 5.
[AC-radius-radsun] timer response-timeout 5
[AC-radius-radsun] retry 5
# Set the interval at which the switch sends real-time accounting packets to the RADIUS server to 15
minutes.
[AC-radius-radsun] timer realtime-accounting 15
# Specify that the switch sends user names without domain names to the RADIUS server.
[AC-radius-radsun] user-name-format without-domain
[AC-radius-radsun] quit
# Create an ISP domain named sun and enter its view.
[AC] domain sun
# Configure the ISP domain to use RADIUS scheme radsun as its default RADIUS scheme.
[AC-isp-sun] authentication default radius-scheme radsun
# Allow the ISP domain to accommodate up to 30 users.
[AC-isp-sun] access-limit enable 30
[AC-isp-sun] quit
2) Configure port security
# Enable port security.
[AC] port-security enable
# Add five OUI values.
[AC] port-security oui 1234-0100-1111 index 1
[AC] port-security oui 1234-0200-1111 index 2
[AC] port-security oui 1234-0300-1111 index 3
[AC] port-security oui 1234-0400-1111 index 4
[AC] port-security oui 1234-0500-1111 index 5
[AC] interface gigabitethernet 0/0/1
# Set the port security mode to userLoginWithOUI.
[AC-GigabitEthernet0/0/1] port-security port-mode userlogin-withoui
3) Verify the configuration