Dhcp test configuration example, Network requirements, Network diagram – H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 598: Configuration procedure

63-19

Square-Sum of round trip time: 256

Last succeeded probe time: 2007-03-14 17:21:07.8

Extend results:

Packet lost in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

DHCP Test Configuration Example

Network requirements

Use the NQA DHCP function to test the time necessary for AC to obtain an IP address from the DHCP
server Switch.

Network diagram

Figure 63-4

Network diagram for DHCP

Configuration procedure

# Create a DHCP test group and configure related test parameters.

system-view

[AC] nqa entry admin test

[AC-nqa-admin-test] type dhcp

[AC-nqa-admin-test-dhcp] operation interface vlan-interface 2

[AC-nqa-admin-test-dhcp] quit

# Enable the DHCP test.

[AC] nqa schedule admin test start-time now lifetime forever

# Display results of one DHCP test.

[AC] display nqa result admin test

NQA entry(admin admin, tag test) test results:

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 624/624/624

Square-Sum of round trip time: 389376

Last succeeded probe time: 2007-03-14 17:47:29.3