Adobe Premiere Pro CS6 User Manual

Page 387

Blue curve control in gray area between halves of a freeze frame speed keyframe

6. (Optional) To change the acceleration or deceleration of the speed change, drag either of the handles on the curve control.

The change of speed eases in or eases out according to the curvature of the speed ramp.

Dragging a curve control handle to ease in a speed change to a freeze frame

Freeze a video frame for the duration of a clip

You can freeze on the clip’s In point, Out point, or at marker 0 (zero), if present.

1. Select a clip in a Timeline panel.

2. To freeze a frame other than the In or Out point, open the clip in the Source Monitor, and set Marker 0 (zero) to the frame you want to

freeze.

3. Choose Clip > Video Options > Frame Hold.

4. Select Hold On, and select the frame you want to hold from the menu.

5. Specify the following options as necessary, and then click OK:

Hold Filters Prevents keyframed effect settings (if any are present) from animating during the duration of the clip. Effect settings use the
values at the held frame.

Deinterlace Removes one field from an interlaced video clip and doubles the remaining field, so that field artifacts (such as combing) are
not apparent in the freeze frame.
Note: If you set the hold frame on an In or Out point, changing the edit point doesn’t change the freeze frame. If you set the hold on Marker
0, moving the marker changes the frame displayed.