Rockwell Automation 2092-DAx Ultra1500 User Manual - Manual (Page 79)

Publication 2092-UM001D-EN-P — July 2005
Commissioning Your Ultra1500 4-7
Testing Your Motor This procedure assumes:
• Power is applied to the Ultra1500 drive,
• Ultraware software is running,
• Ultraware has detected the drive, and
• the Ultra1500 drive is configured.
In this procedure you enable the drive and set the motor velocity to test the
motor.
Note: Refer to the Help file provided with Ultraware for more information on
using the velocity control panel.
To test your motor:
1. Double-click the Ultra1500 icon. The Drive Properties window opens.
Note: Actual values depend on your application.
2. Select Velocity Control Panel (as indicated in the window above). The
velocity control panel window opens.
3. Enter an appropriate low speed in the Velocity Command value field.