Rockwell Automation 2092-DAx Ultra1500 User Manual - Manual (Page 59)

1 Publication 2092-UM001D-EN-P — July 2005
Chapter
3
Connecting Your Ultra1500
Chapter Objectives This chapter provides procedures for wiring your Ultra1500 and making cable
connections. This chapter includes:
• Understanding Basic Wiring Requirements
• Determining Your Type of Input Power
• Grounding Your Ultra1500
• Power Wiring Requirements
• Connecting Input Power
• Connecting Motor Power
• Understanding Feedback and I/O Cable Connections
Understanding Basic
Wiring Requirements This section contains basic wiring information for the Ultra1500.
ATTENTION
!
Plan the installation of your system so that you can
perform all cutting, drilling, tapping, and welding with the
drive removed from the enclosure. Because the drive is of
the open type construction, be careful to keep any metal
debris from falling into it. Metal debris or other foreign
matter can become lodged in the circuitry, which can result
in damage to components.
IMPORTANT
This section contains common servo system wiring
configurations, size, and practices that can be used in a
majority of applications. National Electrical Code, local
electrical codes, special operating temperatures, duty cycles,
or system configurations take precedence over the values
and methods provided.