Rockwell Automation 2092-DAx Ultra1500 User Manual - Manual (Page 165)

1 Publication 2092-UM001D-EN-P — July 2005
Appendix
D
Ultra1500 Operator Interface
Chapter Objectives This appendix describes the Ultra1500 drive status and setting displays that
can be accessed and modified through the Operator Interface. This appendix
includes these sections:
• Using the Operator Interface
• Mode Displays
• Parameter Groupings
The on-line help supplied with Ultraware also contains information about
Ultra1500 Operator Interface functions.
Using the Operator
Interface The Operator Interface provides immediate access to Ultra1500 drive status
displays and monitoring, parameter settings, or functional commands. The
major features of the Ultra1500 Operator Interface are identified in Figure D.1
and described below.
Figure D.1
Ultra1500 Operator Interface
• The 7-Segment LED displays status, parameters, function commands, and
allows drive monitoring.
• The MAIN POWER indicator illuminates when the drive's DC bus is
charged by application of 200–240V power to the L1, L2 and L3 Main
Power pins.
• The CONTROL POWER illuminates when the drive's control electronics
are powered by application of 200–240V power to the L1C, and L2C
Control Power pins.
• The MODE/SET, and ENTER keys provide the operator with access to
drive functions. The directional keys (UP, DOWN, LEFT, and RIGHT edit
drive function settings. These keys allow the operator to monitor and
change the drive’s program.
MODE/SET Key
ENTER Key
CONTROL POWER Indicator
7 Segment LED Display
UP, DOWN, LEFT, and RIGHT
Directional Keys
MAIN POWER Indicator
POWER
MAIN CONTROL
POWER