Adobe InDesign CS4 - Manual (Page 400)

392 USING INDESIGN CS4
Frames and objects
Move objects
Use the Selection tool to move both the frame and its content; use the Direct Selection tool to move either the frame
or its content.
Note: For best results, use the Selection tool to move multiple objects. If you use the Direct Selection tool to select multiple
objects or paths, dragging moves only the selected graphic, path, or anchor points.
1 Select an object to move. To move both the frame and its content, use the Selection tool to select the frame. To move
the content without moving its frame, direct-select the object. To move a frame without moving the content, direct-
select the frame, and select all the anchor points.
2 Do one of the following:
• To paste the object (or a copy of it) in a new location, choose Edit > Cut or Edit > Copy. Target the destination
spread, and choose Edit > Paste. The objects appear in the center of the target spread.
• To paste a copy at the same position as the original, choose Edit > Copy. Then, choose Edit > Paste In Place. (To
offset the copy from the original, nudge it using the arrow keys.)
If you want an object to appear in the same position on many pages, consider creating a master page and paste the
object on
it.
• To move an object to a specific numeric location, type a value for each of the X (horizontal) or Y (vertical) position
options in the Transform or Control panel. Then press Enter (Windows) or Return (Mac
OS).
• To nudge an object slightly in one direction, press or hold an arrow key; to nudge an object ten times as far, hold
down Shift as you press an arrow key.
• To move an object by dragging, drag the object to a new position. Shift-drag to constrain the movement of the
object horizontally, vertically, or diagonally (in multiples of 45°).
Move objects by a precise amount
You can use the Move command to move an object by a specific amount. This command also lets you move a copy of
the selected object, leaving the original in place.
1 Select an object to move. To move both the frame and its content, use the Selection tool to select the frame. To move
the content without moving its frame, direct-select the object. To move a frame without moving the content, direct-
select the frame, and select all the anchor points.
2 Choose Object > Transform > Move, or double-click the icon for the Selection or Direct Selection tool in the
toolbox.
3 In the Move dialog box, do one of the following:
• Enter the horizontal and vertical distances that you want the object to move. Positive values move the object down
and to the right of the x axis; negative values move the object up and to the left.
• To move an object a precise distance and angle, enter the distance and angle for the move. The angle you enter is
calculated in degrees from the x axis. Positive angles specify a counterclockwise move; negative angles specify a
clockwise move. You can also enter values between 180° and 360°; these values are converted to their corresponding
negative values (for example, a value of 270° is converted to –90°).
4 Do any of the following:
• To preview the effect before you apply it, select Preview.
• To move the object, click OK.
• To move a copy of the object, click Copy.
Updated 18 June 2009