Maxim Integrated DS4830 Optical Microcontroller - Manual (Page 71)

DS4830 User’s Guide
71
Channel 5
LT HT
Channel 6
LT HT
Channel 7
LT HT
……….
Channel 5
LT HT
Channel 6
LT HT
Channel 7
LT HT
……….
Channel 6*
LT HT
Channel 6*
LT HT
* Note: Channels can be defined multiple times in the list.
Figure 9-2: Quick Trip Operation
9.1.3
– Quick Trip Interrupts
The DS4830 quick trip has two interrupt flag registers the Low Trip Interrupt Flag Register (LTI) and High Trip interrupt
Flag Register (HTI). Each flag bit refers to the corresponding list sequence number defined in the QTLST. The
corresponding bit is set in the interrupt flag register if the corresponding sequence list number for the channel is tripped.