Cabletron Systems 1800 - Manual (Page 398)

C-6 SmartSwitch 1800 4. 0 User G uide, Rev 01
2. # of Leading Digits to Delete is set to any value greater than 0 .
3. Auto Dial is set to Y .
The following illustration and example configurations and dialing scenarios further
illustrate how this feature is configured and used.
Figure C-3 Variable-Length Dialing Example
Node 1:
●
System-Level Parameters:
◆ Voice Node Number = 1 .
◆ Speed Map Dial Digits = 4 .
◆ User Dialed Extended Dial Digits = 4 .
●
Speed-Dial Map Table:
◆ Speed Dial Abbreviated Digits = 0033 .
◆ Long Dial Digit Mapping = 000214 . ( 2 = node number, 4 = Voice port
number.)
◆ Extended Dial String = 5555 .
●
Voice Port 4 Configuration:
◆ Source of Extended Digits = MAP .
◆ Dial Timer = 3 (sec.)
Node 2:
●
System-Level Parameters:
◆ Voice Node Number = 2 .
◆ User Dialed Extended Dial Digits = 4 .
●
Voice Port 4 Configuration:
◆ Source of Extended Digits = MAP .
◆ Forward Delay = 4 (.25 sec intervals)
◆ Forwarded Output Digits = Ext .
Node 2
033
3
Node 3
Node 1
0033
PBX
Telephone
Phone
or Fax
#6666
Voice Port 4
Voice Port 5
Voice Port 5
PBX
Phone
or Fax
Phone
or Fax
#5555