Ipx rip router filter parameters -7, Table, Table 15-5 – Cabletron Systems 1800 User Manual
Page 239: Packet type valu, Desti nation network val ue, Desti nation node value, Desti nation socket value, Source netw or k value, Source node val ue, Source socket valu
Configuring IPX
15-7
Packet Type Value
identifies the packet type:
00
= unknown packet type
01
= RIP packet
04
= SAP packet
05
= SPX (Sequenced Packet Exchange) packet
11
= NCP (NetWare Core Protocol) packet
14
= Propagated packet, used for NetBIOS (an IBM protocol that performs
transport- and session-layer tasks)
Destination Network Value
is the network number of the destination node's network. The internetwork address is
the network number followed by the socket number.
Destination Node Value
is the physical address of the destination node. The node's internetwork address is the
network number followed by the node address followed by the socket number.
Destination Socket Value
is the socket address of the packet's destination process.
Source Network Value
is the network number of the source node's network.
Source Node Value
is the physical address of the source node.
Source Socket Value
is the socket address of the packet's source process.
Filter Name
helps the user identify the filter. The name is not used by the software.
Router Address Value
identifies the router to which the filter will apply.
Table 15-5 IPX RIP Router Filter Parameters
Parameter
Valid Values
Default Value
1–31 characters
none
0–ffffffffffff (6 bytes)
000000000000
Router Address Mask
0–ffffffffffff (6 bytes)
00000000