Cabletron Systems 1800 - Manual (Page 204)

13-6 SmartSwitch 1800 4. 0 User G uide, Rev 01
Reviewing and Configuring the Speed-Dial Map Table
The speed-dial map table contains dial numbers (similar to telephone numbers) that
can be used to call remote devices. The table associates each of these numbers (called
long-dial numbers) with a shorter (usually) speed-dial number that can be used to call
the device, as well as any configured extended-dial digits that will be forwarded by the
device.
To display the existing Speed-Dial Map table, press [B] at the Voice Configuration
Menu (or [A], [F], [B] from the Main Menu). The display will include a list of con-
figured speed-dial numbers with associated long-dial and extended-dial strings.
To configure a Speed-Dial number, press [C] at the Voice Configuration Menu. When
prompted for Speed Dial Abbreviated Digits , enter the number of characters configured
for Speed Map Dial Digits in Voice-Level System Configuration. (The maximum is
four.) A question-mark wildcard can be used for any single digit, and an asterisk
wildcard can be used for any number of digits. (See
page C-8 .)
Figure 13-3 Speed-Dial Map Configuration Menu
[A], [F],[C] from Main Menu
Node Name=nod e_xyz
Sp eed Dial Map C onfiguration Parameters
* S peed Map Abb reviated Digits 101
A Lon g D ial D igit Map ping 000101
B Extend ed D ial S tring 12345,7890,12345
Option: