Configuring async port records, Configuring async port records -8, Async pad port screen -8 – Cabletron Systems 1800 User Manual
Page 186: Async port(s), Profile name, After making any changes, be sure to press, At the port configuration menu (or, The letter, Will be displayed preceding the name in the, Column
12-8
SmartSwitch 1800 4. 0 User G uide, Rev 01
Profile Name
is a name given to the async PAD's "
." If login is not required (as determined in
the Port record), the profile specified in Port record is always in effect. If login is
required, the profile specified in the PAD Login record becomes effective at login,
even if it is different from the profile specified in the Port record.
If the profile specified is not defined in the database, the default profile,
90
, will be in
effect. (See "
Configuring Async PAD Profiles
" on page 12-2.)
Configuring Async Port Records
Once the necessary Node, Line Processor, and protocol parameters have been con-
figured, press
[A]
at the Port Configuration Menu (or
[A], [C], [A]
from the Main Menu.
When prompted, enter a port number (or press
[Enter]
to accept the default of
0
). Valid
port numbers depend on the model of SmartSwitch 1800—see port locations on
.
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
on page 12-
9.) The following figure is an example of an existing port.
Figure 12-2 Async PAD Port Screen
[A],[C],[A]
from Main Menu
If a record does not exist for the async PAD profile identified by
Initial
Profile Name
, the letter
U
will be displayed preceding the name in the
Database
column.
After making any changes, be sure to press
[F7]
to update the
system memory. Otherwise, the changes will not take effect until
the next re-boot of the SmartSwitch 1800.
N ode Name=n odexyz
A sync PA D Port Parameters
*
Port: 0
Link State: Linku p
*
I/O:–R S-232
D atabase
Sys tem Memory
A Port Type
A sync PAD
As ync PAD
B Ph ysical Port I nterface
R S-232
RS -232
C Blocked Port Flag
N
N
D X.3 Line S peed
au tobaud
autob aud
E Initial Profile Name
90
90
F Login R eq uired
N
N
G Parity
0,none
0,none
H DCE Cab le A ttach ed
N
N
I
Mas k Lin k A larms
N
N
J
X.25 Parameter Options
K Autocall Options
L Brow se Profile
M Mod em Signal Options
N Disconnect Options
O Asyn c PAD Op tion s
Option: