Cabletron Systems 1800 - Manual (Page 158)

10-2 SmartSwitch 1800 4. 0 User G uide, Rev 01
Configuring BSC Interactive Port Records
Once the necessary Node ( Chapter 4 ) and protocol ( Chapter 5 ) parameters have been
configured, press [A] at the Port Configuration Menu (or [A], [C], [A] from the Main
Menu. When prompted, enter a port number (or press [Enter] to accept the default of
0 ). Valid port numbers depend on the model of SmartSwitch 1800—see port locations
on page 6-1 .
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
Table 10-1 on page 10-
4.) The following figure is an example of an existing port.
Figure 10-1 BSC Interactive Port Record
[A],[C],[A] from Main Menu
If BSC Type (item J) is 2-HPAD , item K will be Answer Non-Configured .
After making any changes, be sure to press [F7] to update the
system memory. Otherwise, the changes will not take effect until
the next re-boot of the SmartSwitch 1800.
Pressing [L] lists more parameters, and pressing [M] displays a screen similar to the fol-
lowing. (All BSC Interactive parameters are listed in Table 10-1 and Table 10-2 .)
N ode Name=n odexyz
BS C Interactive Port Parameters (screen 1 of 2)
*
Port: 1 Link State: Linku p
* I/O:–U NIV ERSA L
D atabase Sys tem Memory
A Port Type BS C I nter BSC I nter
B Ph ysical Port I nterface V .35 V.35
C Blocked Port Flag N N
D Lin e Sp eed 9600 bps 9600 bps
E Retran smission Period (ms ) 2000 2000
F Maximum Retransmiss ion s 5 5
G Maximum Bytes p er Frame 4105 4105
H Generate Clock Y Y
I Rcv C lock (TT) from D TE N N
J BSC Type 1–tp ad 1–tpad
K Activate Conn ection w /o poll Y Y
L Interactive Parameters - Screen 2
M Sub scriber I nformation - Screen 3
Option: