Cabletron Systems 1800 - Manual (Page 122)

8-30 SmartSwitch 1800 4. 0 User G uide, Rev 01
If you are replacing called or calling address with original user data,
all the replacing characters must be digits. Also, the user data must be
specified in the template ID.
T = Text (valid for replacement of user data only). Type T followed (with no spaces)
by the text that will replace the user data.
Replacing Protocol ID
Press [E] at the Translation Template Maintenance Menu. When prompted, enter a
string of up to four hex bytes. If fewer than four bytes are entered, the remaining field
is filled with zeroes.
Replacing Facilities
Press [F] at the Translation Template Maintenance Menu. When prompted, enter a
string of up to 109 hex bytes.
Translation Examples
Example 1 – Replacing the first four digits of the called address with digits from the
user data field:
Assume the Template ID is 3110*U* and the called address field in the template is
U1234X5 . A packet with called address 31101234567890 and user data 5678 is
received. The packet matches Template ID 3110*U* ; therefore, a translation
occurs as follows:
◆ U1234 of U1234X5 indicates that positions 1, 2, 3, and 4 of the user data of
the received packet ( 5678 ) will replace the first four digits of the called
address ( 3110 ).
◆ X5 of U1234X5 takes the fifth position of the template ( * ) and searches for a
match in the part of the original called address not yet translated
(
1234567890 ). (The match is found in the entire string 1234567890 .)
The translated called address is 56781234567890 .
Example 2 – Appending the subaddress from the user data to the called address:
Assume the Template ID is 3110*U?? and the called address field in the template
is X12345U12 . A packet with called address 311012345678 and user data 99 is
received. The packet matches Template ID 3110*U?? ; therefore, a translation
occurs as follows:
◆
User data 99 from the packet is appended to the called address
311012345678 .
The translated called address is 31101234567899 .