Cabletron Systems 1800 - Manual (Page 300)

20-2 SmartSwitch 1800 4. 0 User G uide, Rev 01
Displaying Port Status
Press [B] at the Status Displays Menu to display the status of all serial lines on this
node (LAN port status is not displayed).
Figure 20-2 Port Status Display
[C],[B] from Main Menu
Information in this Display:
●
P – is the port number.
●
Type – is the port type:
FRL = Frame relay X25 = X.25 SNA = SNA
BSI = BSC Interactive BSI = BSC Batch ASY = Async PAD
VCE = Voice LOG = Logical Eth = Ethernet.
● PPS – is packets per second passing through the port.
● Conn# – is the number of virtual connections currently in use.
● State for non-Voice ports:
Linkup – The necessary level 1 modem signals are present, and the level 2
link is up. (For frame relay PVCs, this state means that LMI is running.)
Restarting – Level 2 is up and level 3 is starting its initial handshake
sequence.
Operational – The line is up and ready to establish a connection or transfer
data. On a frame relay logical DTE port with link layer management con-
figured, this state means that the port has received a Full Status Response
from the DCE (frame relay switch), as a result of a Full Status Enquiry sent
by the SmartSwitch 1800.
On a frame relay logical DCE port, this state means that the port has received
a Full Status Enquiry from the attached DTE.
Node N ame= nod e_xyz
Port Statu s Display (Page 1)
P Typ e PPS Conn # State P Type PPS Conn # State
0 FRL 62 4 Operational 1 SNA 127 12 Operational
2 FRL 112 7 Operational 3 SNA 60 6 Operational
4 V CE 10 1 On_Hook 5 VCE 20 1 On_Hook
0 Eth ernet
F1: Login