Remote control from an async pad port, Remote control from an async pad port -3 – Cabletron Systems 1800 User Manual
Page 285
On-line Operat ions
19-3
Remote Control from an Async PAD Port
mode
(described on page A-1), follow this
procedure to take remote control of a SmartSwitch 1800:
of the node (specified in its Node Defaults file), fol-
lowed (with no spaces) by the letter
d
and the
of the
node (also specified in its Node Defaults file). An example of a correct entry for
a
Remote Control ID
of
1234
and a password of
remote
is
1234dremote
.
2. When the remote node accepts your entry, you will be asked:
Are you a PAD user?
Type
y [Enter]
.
3. When prompted, enter the password of the controlled node. The display at the
controlled node will say:
Under remote control. Keyboard blocked by id = "n."
The
M
ain Menu at the controlling node will act as the Main Menu of the controlled
node, and the displayed remote ID is the ID of the controlled node.
Placing a call through the SmartSwitch 1800 is described in
.
Rebooting the Remote Node
Before rebooting, notify all users of this node, since all connec-
tions on all ports will be cleared.
Press
[.]
(period) to reboot the node. When asked:
Remote reboot the node?
, press
[Y]
.
Exiting Remote Control
Press
[,]
(comma) to exit remote control. When asked:
Stop remote control?
, press
[Y]
.
Node Name="NN"
(where
"NN"
is the
configured in
Node Defaults) will be
displayed in the upper right hand corner at the remote node, meaning that the remote
node is now under local control (control at its own screen).
If the controlled node detects that the remote control line failed during a remote
control session, remote control will be terminated and the remote node's local Main
Menu will be displayed on its screen.