Cabletron Systems 1800 - Manual (Page 337)

St atistics Displays 21-11
LAN Interface Statistics Displays
To dispay LAN Interface statistics, press [G] at the Statistics Menu. When prompted,
enter:
●
LAN Card Number : Press [Enter] , accepting the default (and only valid value)
of 0 .
● Report Interval : 5–65535 . (Default is 5 .)
Figure 21-10 LAN Interface Statistics Display
[E],[G] from Main Menu
This example shows an Ethernet interface. A Token Ring interface display
is similar. (Statistics for both are listed later.)
Information in this Display:
●
Hardware Status – will be one of these:
◆ Not Installed
◆ Failed Startup Diagnostics
◆
Failed due to Configuration Problem
◆
Not Operational due to Hardware Fault
◆ Operating Marginally due to Soft Faults
◆ Fully Operational
●
MAC Status – can be either/both/neither of these:
◆
Bound – the MAC and protocol drivers are linked to enable communication
between them.
◆ Open – the OpenAdapter function, which activates the adapter's network
connection, is enabled.
Nod e Name=nod e_xyz
LAN C ard Statistics D is play
Card Nu mber: 0 Type: Ethern et MTU: 1500
Report Interval (sec): 5
Cu rrent Time: 6/05/97
10:32:45
Hard ware Status : Fu lly Op erational
MAC Statu s: Bound , Op en
Pack et Filters: D irected/Multicast or Grou p/Fu nction al, Broadcast
STA TISTI C C URR C UMULATI VE STA TISTI C CUR R C UMULATI VE
Pack ets I n 21 269134 Pack ets Out 21 269420
Bytes In 8161 139690157 Bytes Out 8161 139822450
Multi-C ast In 0 0 Multi-C astOut 0 0
Broadcast In 0 0 Broadcast Out 0 0
Frm Dropp ed In 0 0 Frm Dropped Out 0 0
Q D rop ped I n 0 0 Dropp ed Timeou t 0 0
Errors In 0 0
Alignment Errors 0 0 Xmit w /1 Coll 0 0
Overrun Errors 0 0 Xmit w /mu l Coll 0 0
Xmt/Deferral 0 0 Xmt CD Heartbeat 0 0
Not Xmt (Coll) 0 0 Frm w/Lost CS 0 0
Late C ollision 0 0 Un derrun s 0 0
F4: Clear Cumu lative Statistics, Others : Exit