Bridge sap filter parameters -9, Bridge protocol filter parameters -9, Source mac addr ess value – Cabletron Systems 1800 User Manual
Page 261: Desti nation mac address val ue
Configuring Bridging
16-9
Source MAC Address Value
is the MAC address in the source address field of the frame.
Destination MAC Address Value
is the MAC address in the destination address field of the frame.
Filter Name
helps the user identify the filter. The name is not used by the software.
SSAP Value
identifies the source Service Advertising Protocol (SAP).
DSAP Value
identifies the destination SAP.
Filter Name
helps the user identify the filter. The name is not used by the software.
Protocol ID Value
is the IEEE 802 value of the protocol (SNAP or Type II) to which the filter will apply.
Table 16-4 Bridge SAP Filter Parameters
Parameter
Valid Values
Default Value
1–31 characters
none
0–ff
(1 byte)
0
SSAP Mask
0–ff
0
0–ff
(1 byte)
0
DSAP Mask
0–ff
0
Table 16-5 Bridge Protocol Filter Parameters
Parameter
Valid Values
Default Value
1–31 characters
none
0–ffff (2 bytes)
0000
Protocol ID Mask
0–ffff (2 bytes)
0000