Disabling and enabling sdlc pus, Disabling and enabling sdlc pus -13, On-line sdlc pu operations menu -13 – Cabletron Systems 1800 User Manual
Page 295: Disable an sdlc pu, Disable a range of sdlc pus, Enable an sdlc pu, Enable a range of sdlc pus
On-line Operat ions
19-13
Disabling and Enabling SDLC PUs
These operations disable or enable the link station connection between the node and a
PU or a range of PUs (grouped by sequential port numbers).
Press
[G]
at the Operations Menu to display the following figure.
Figure 19-2 On-Line SDLC PU Operations Menu
[B],[G]
from Main Menu
Select the desired operation from the menu. When prompted:
●
If enabling or disabling a single
PU
, enter:
◆
RLP Port
:
0–7
. Valid numbers for physical ports depend on the model of
SmartSwitch 1800—see port locations on
.
◆
PU station address
:
0–ff
.
●
If enabling or disabling a range of PUs, enter:
◆
From port
:
0–7
. Valid numbers for physical ports depend on the model of
SmartSwitch 1800—see port locations on
.
◆
To port
:
0–7
.
Nod e Name=nod e_xyz
On-Line S DLC PU Operation s
A D is able an SDLC PU
B D is able a R ange of SDLC PUs
C En able an SDLC PU
D En able a R ange of SDLC PUs
Option::