Cabletron Systems 1800 - Manual (Page 185)

Configuring Async Ports 12-7
Configuring Async PAD Login Parameters
If an async subscriber will be required to log into a SmartSwitch 1800 async PAD, a
login ID must be assigned. To display a list of existing login IDs and associated PAD
profile names, press
[C] at the Async PAD Configuration Menu (or [A], [A], [F], [C]
from the Main Menu).
To add or change login ID parameters, press [D] at the Async PAD Configuration
Menu and enter a subscriber ID (described on page 12-15).
Figure 12-1 Async PAD Login Parameters Screen
[A],[A],[F],[D ] from Main Menu
If a record does not exist for the specified profile (or if no profile is
specified), the letter
U will be displayed preceding (or in place of) the
profile name.
Login Parameters
Login Password
interacts with the Login Required parameter in the Port record. If login is required, the
user must log into the PAD in order to make a call through it.
Table 12-2 Async PAD Login Parameters
Parameter Valid Values Default Value
Login Password 0–6 characters QWERTY
Profile Name 0–10 characters 90
Node Name=nod exyz
A sync PAD Login ID
* Login ID 123451234512345
A Login Pas sword pass
B Profile Name 90
Option: