Cabletron Systems 1800 - Manual (Page 160)

10-4 SmartSwitch 1800 4. 0 User G uide, Rev 01
BSC Interactive Port Parameters
1 75, 150, 300, 600, 1200, 2400, 4800, 9600, 14.4K, 19.2K .
2 Relevant only if Physical Port Interface is other than RS-232 and Generate Clock is Y .
3 See note under Figure 10-1 .
Table 10-1 BSC Interactive Port Parameters
Parameter Valid Values Default Value
Port Type BSC-I (not valid here)
Physical Port Interface see explanation see explanation
Blocked Port Flag Y/N N
Line Speed 75 bps – 19.2 Kbps 1 9600 bps
Retransmission Period (ms) 1–9999 2000
Maximum Retransmissions 1–99 5
Maximum Bytes per Frame 25–4105 4105
Generate Clock Y/N Y
Rcv Clock (TT) from DTE Y/N 2 N
BSC Type 1 (TPAD), 2 (HPAD) 1
Answer Non-Configured 3 Y/N Y
Activate Connecti on w/o poll 3 Y/N Y
EBCDIC n/a – leave at default Y
Cal l Info in Cal l Request Packet n/a – leave at default Y
Clear VC on Last Device Down Y/N N
Transparent Text Supported n/a – leave at default Y
End-to-End Acknowledgement n/a – leave at default N
Full Duplex n/a – leave at default Y
Multidrop Y/N N
Sl ow Poll Retry Count 10–150 20
Sl ow Poll Retry Fr equency 1–200 20
# of Beginning Sync Char 2–10 2
# of Tr aili ng Pad Characters 1–10 1
Pol l Interval Timer (msec) 100–1000 500
No Response Ti mer (sec) 2–10 2
No Response Retry Count 1–255 5
Er ror Retransmit Count 1–255 5
NAK Retry Count 1–255 5