Cabletron Systems 1800 - Manual (Page 201)

Configuring Voice 13-3
Configuring Voice System-Level Parameters
Certain database parameters apply to specific ports or interfaces. Others are con-
figured only once, and apply to all voice calls on the node.
Pressing [A] at the Voice Configuration Menu will display a menu similar to the fol-
lowing.
Figure 13-2 Voice System-Level Configuration Menu
[A],[F],[A] from Main Menu
After making any changes, be sure to press [F7] to update the
system memory. Otherwise, the changes will not take effect until
the next re-boot of the SmartSwitch 1800.
Table 13-1 lists the system-level parameters. Explanations of the parameters follow
the table.
Table 13-1 Voice System-Level Parameters
Parameter Valid Values Default Value
Voice Node Number 1–9999 1
Ri ng Voltage, Frequency 75V/16.66Hz, 80V/20Hz, 75V/25Hz,
60V/50Hz, 75V/50Hz
80V 20Hz
Country Code 0–999 1
Speed Map Dial Digits 1–4 3
Voice Rates Minimum (kbi ts/sec) 4. 8, 8, 32, 64 4.8
Voice Rates Maximum (kbits/ sec) 4. 8, 8, 32, 64 64
User Di aled Extended Dial Digits 0–16 0
N ode N ame= node_xyz
Voice S ystem-Level C onfiguration Parameters
A Voice Node Numb er 1
B Ring Voltage, Freq uency 80V 20.00Hz
C Cou ntry Cod e 1
D Sp eed Map D ial D igits 4
E Voice Rates Minimum 8
F Voice Rates Maximum 64
G Us er D ialed Exten ded D ial Digits 0
Op tion :