Cabletron Systems 1800 - Manual (Page 170)

11-2 SmartSwitch 1800 4. 0 User G uide, Rev 01
Configuring BSC Batch Ports
Once the necessary Node ( Chapter 4 ) and protocol ( Chapter 5 ) parameters have been
configured, press [A] at the Port Configuration Menu (or [A], [C], [A] from the Main
Menu. When prompted, enter a port number (or press [Enter] to accept the default of
0 ). Valid port numbers depend on the model of SmartSwitch 1800—see port locations
on page 6-1 .
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
Table 11-1 on page 11-
3.) The following figure is an example of an existing port.
Figure 11-1 BSC Batch Port Record
[A],[C],[A] from Main Menu
After making any changes, be sure to press [F7] to update the
system memory. Otherwise, the changes will not take effect until
the next re-boot of the SmartSwitch 1800.
Pressing [J] lists more parameters, and pressing [K] displays a screen similar to the fol-
lowing. (All BSC Batch parameters are listed in Table 11-1 .)
N ode Name=n odexyz
BS C Batch Port Parameters (screen 1 of 2)
*
Port: 1 Link State: Linku p
* I/O: V .35
Datab ase Sys tem Memory
A Port Type BSC Batch BSC Batch
B Ph ysical Port I nterface V.35 V.35
C Blocked Port Flag N N
D Lin e Sp eed 9600 bps 9600 bps
E Retran smission Period (ms ) 2000 2000
F Maximum Retransmiss ion s 5 5
G Maximum Bytes p er Frame 4105 4105
H Generate Clock Y Y
I Rcv C lock (TT) from D TE N N
J Batch Parameters - Screen 2
K Sub scriber I nformation - Screen 3
Option: