Cabletron Systems 1800 - Manual (Page 316)

20-18 SmartSwitch 1800 4. 0 User G uide, Rev 01
Possible parameter settings are:
Parameter Values
LAN Card 0, None
Trace IP On, Off
Trace IPX On, Off
Trace Bridge On, Off
Trace Unknown On, Off
When Full Stop, Wrap
IP, IPX, and Bridge can be set to On only if the protocols are loaded in the
SmartSwitch.
If When Full is Stop , the capture will stop automatically when the buffer is full.
If When Full is Wrap , the monitor will continue to capture data, overwriting data
in the buffer as necessary. (The first data in will be the first overwritten.)
The function keys work as follows:
[F1] refreshes the screen, with any changes that were made to items A–F.
[F7] starts a capture.
[F2] stops the capture.
[F3] returns to the next higher menu. A capture in progress will remain active.
[F4] purges the buffer.
Displaying Capture Data
To display captured LAN data, press [C] at the Traffic Monitor Menu. The display will
be similar to the following:
Figure 20-9 LAN Capture Display
[C],[E],[C] from Main Menu
Nod e Name=n ode_xyz
Event 2 of 1: 6
N um Time D Type Len D ata
------- -------- --- ------ ------ -------------------------------------------------------------
00001 000.00 I 0 IP 0100
FFFFFFFFFFFF 0000C 0DCBE28 0806 HDOHDHDNJJJFEFELMFFOFKOEKFOEKFO
EKFOEKFOKEWFOKEFOKMFEMFOKF EWKFEWKFFLELF
00002 002.40 O0 IP 0100
FFFFFFFFFFFF 0000C 0DCBE28 0806 HDOHDHDNJJJFEFELMFFOFKOEKFOEKFO
EKFOEKFOKEWFOKEFOKMFEMFOKF EWKFEWKFFLELF
00003 004.30 I 0 IP 0100
FFFFFFFFFFFF 0000C 0DCBE28 0806 HDOHDHDNJJJFEFELMFFOFKOEKFOEKFO
EKFOEKFOKEWFOKEFOKMFEMFOKF EWKFEWKFFLELF
+ - PgU p,PgDn F3: Exit F4: Pu rge Captu re F7: Go to ev #