Cabletron Systems 1800 - Manual (Page 120)

8-28 SmartSwitch 1800 4. 0 User G uide, Rev 01
The fields must match the equivalent fields in the Call Request packet, but not neces-
sarily literally—they can use wildcards.
Figure 8-10 Address Translation Template Screen
[A],[C],[C],[B] from Main Menu
Translation Template Parameters
1 Used simply for ease of identification.
2 These determine the translation formula:
P = Pass through unchanged.
R = Remove entire field.
L = Replace with literal digit.
X = Replace with original called address.
G = Replace with original calling address.
U = Replace with original user data.
T = Replace with ASCII text.
If replacing all or part of a field, see "Replacing (field type)" over the next few pages.
All wild cards are valid in the translation template, allowing one template to function
for many calls.
Table 8-4 Translation Template Parameters
Parameter Valid Values Default Value
Template Name 1 0–31 characters none
Cal led Address P,R,L,X,G,U 2 P
Cal ling Address P,R,L,X,G,U 2 P
User Data P,R,L,X,G,U,T 2 P
Pr otocol ID P , 0–8 characters 2 P
Facili ties P ,R, 0–218 characters 2 P
N ode Name=n odexyz
Trans lation Template Maintenan ce
* Port 3
* Direction I
* Temp late ID 223*G19972U111154321*
A Temp late Name tempexamp
B Called Ad dres s P
C User D ata D
D Calling Ad dres s L12345C23U 234
E Protocol ID P
F Facilities P
Option: