Format, Bandw idth al location g roup, Host mac addr ess – Cabletron Systems 1800 User Manual
Page 267: Session type, Lan id
Configuring Bridging
16-15
Make sure the DLCI is not part of a
. (See page 7-22.) Also make sure that the DLCI is different
than the one configured for the physical port in the frame relay
PVC record.
Format
is the RFC1490 encapsulation method used for bridged traffic. Note that specifying
8023_TB will add an Ethernet header to the frame, and 8025_SRB will add a Token
Ring header.
Bandwidth Allocation Group
assigns the interface to one of sixteen groups whose parameters regulate bandwidth
usage. See "
Configuring Frame Relay Backup Groups
" on page 7-22.
Host MAC Address
is the MAC address of the LLC2 host in the node.
Session Type
if
Originated
, means that LLC2 connections from the configured
Host MAC Address
can use this interface. If
Terminated
, connections to the configured address can use this
interface.
LAN ID
identifies the ring number used by a frame relay-compliant source-route bridge at the
other end of this PVC. The value is normally assigned by a system administrator.
LAN IDs can also be configured in
.
Each LAN ID must be unique within the network on which this
node will operate.