Displaying port signals, Displaying port signals -6, Port signals display -6 – Cabletron Systems 1800 User Manual
Page 304: Port signals, Is always, Is the port number, Are physical ports, Are logical ports), unless, Remote control, File transfer
20-6
SmartSwitch 1800 4. 0 User G uide, Rev 01
●
RLP
– is always
0
, except for a remote control, file transfer, or alarm connection,
in which case this number is always
253
.
●
P
– is the port number (
0-7
are physical ports,
8–63
are logical ports), unless
RLP
is
253
, in which case:
66
= Remote control,
67
= File transfer,
68
= Alarm con-
nection.
Displaying Port Signals
This display lists basic configuration and line status for all serial ports, as well as
signal states (on/off) at the physical interfaces.
Press
[D]
at the Status Displays Menu. When prompted for an
RLP
number, press
[Enter]
, accepting the default (and only valid value) of
0
.
Figure 20-5 Port Signals Display
[C],[D]
from Main Menu
Information in this Display
●
Port Number
– is self-explanatory.
●
Phy Interface
– is the type of connector on the port, taken from the Port record.)
●
Port Config
– is the port type (
FRL
,
SNA
,
X25
, etc.) as configured in the Port
record. If no record has been created for this port,
No Config
is displayed on this
line and the one below it.
●
Logical Inter
– is the logical interface,
DCE
or
DTE
, as taken from the Port record.
If no record has been created for this port,
No Config
is displayed on this line and
the one above it.
●
Line Speed
– is the speed configured in the Port record.
Nod e Name=n ode_xyz
Line Proces sor Statu s
RLP: 0
I nterface: R S-422
Port N umber:
0
1
2
3
Phy In terface:
X.21
RS-449
X.21
Port C onfig:
FR
No
S NA
FR
Logical In ter:
D TE
Con fig
DCE
DC E
Line Speed:
1.008M
1.472M
2.048M
Line Status :
Oper
Oper
Oper
TD (2)
ON
ON
ON
R D(3)
OFF
ON
ON
R TS(4)
OFF
ON
ON
C TS(5)
OFF
ON
ON
D SR(6)
ON
ON
ON
D CD(8)
ON
ON
ON
TC (15)
ON
ON
ON
R C(17)
ON
ON
ON
D TR(20)
ON
ON
ON
\
F2:Next RLP Card
F9:S top Remote
F10:A bort R emote
PgUp :First 4 Ports
PgD n:Last 4 Ports
Oth ers:Exit08:14:52