beautypg.com

Testing a translation template, Testing a translation template -32, Address translation test screen -32 – Cabletron Systems 1800 User Manual

Page 123: Test x.25 address translation templates, Press, At the x.25 address translation templates menu, Default is, Incoming) or, Outgoing). (default is

background image

Configuring X.25

8-31

Testing a Translation Template

Press

[C]

at the X.25 Address Translation Templates Menu (

[A], [C], [C], [C]

from the

Main Menu) to test a translation template you have created.

When prompted, enter:

Port

. (default is

0

.) Valid port numbers depend on the model of SmartSwitch

1800—see port locations on

page 6-1

.

Direction

:

I

(incoming) or

O

(outgoing). (Default is

I

.)

Called address

to be translated.

Calling address

to be translated.

Facility length + facility + user data

. (The user data includes four bytes for pro-

tocol ID, which must be entered as a hex string.) To specify only user data, at
the above prompt enter

00

for a facility length, nothing for a facility, then the

desired user data, including the 4-byte protocol ID.

After you enter this information, the SmartSwitch 1800 creates a test packet and sends
it through the translation process, and displays the results, as shown in the following
example.

Figure 8-11 Address Translation Test Screen

[A],[C],[C],[C]

from Main Menu

Nod e Name=n odexyz

Packet Translation Tes t
Port:0

Direction :Incoming

Original Packet:

10010B7712345673333333000100000035353535

C alled A ddress:

1234567

Callin g A ddress: 3333333

U ser Data Protocol ID:

01000000

Us er Data:

55555

Facilities:

Trans lation Temp late:
Template ID :

1234C *U*

C alled A ddress:

L8401X 7

Callin g A ddress: P

U ser Data Protocol ID: P

Us er Data:

P

Facilities:

P

Trans lated Packet:

10010B74840133333330000100000035353535

C alled A ddress:

8401

Callin g A ddress: 3333333

U ser Data Protocol ID: 01000000

Us er Data:

55555

Facilities:

S trike an y k ey to continu e