Cabletron Systems 1800 - Manual (Page 132)

9-6 SmartSwitch 1800 4. 0 User G uide, Rev 01
SNA Port Parameters
1 Although 10 characters can be entered, only the first 8 will be recognized by some
remote manager devices.
2 Can sometimes be changed without disabling the link—see explanation.
3 This parameter is relevant only if Physical Port Interface is something other than RS-
232 and Generate Clock is Y .
4 This parameter is relevant only if SNA Type is 2 (HPAD).
Table 9-1 SNA Port Parameters
Parameter Valid Values Default Value
Port Type SNA (not valid here)
Name up to 8 characters 1 none
Physical Port Interface see explanation see explanation
Blocked Port Flag Y/N N
Line Speed see explanation none
No Data Poll Peri od (ms) 1–500 40
No Resp Poll Per iod (ms) 40–9999 2000
Maximum Retransmissions 0–99 5
Outstanding Frames 2 1–128 7
Generate Clock Y/N Y
Rcv Clock (TT) from DTE 3 Y/N N
SNA Type 0–3 1
NRZ Y/N Y
Packet Si ze 16–4096 (bytes) 1024
Disable Request Di sconnect 4 Y/N N
LPDA Support 0–2 0 (none)
Idle Fill Character 0xFF, 0x7E 0xFF
Inactivi ty Timer (sec) 4 15–250 50
L1-Duplex Ful l/Half Ful l