Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 925)

Allen-Bradley 7300 Series CNC
Tape Compatibility
Appendix D
D-3
Table D.B lists all standard 7300 M-codes that the control can execute in
7300 mode.
Important: In order to provide the same functionality as the 7300 PAL,
the system installer has to write a specific application in PAL when
interfacing with the control.
Refer to the System 7320 Programming Manual for details on these
M-codes and their operation.
Table D.B
M-code
M-code: Function:
M00 Program stop
M01 Optional program stop
M02 End of program
M03 Spindle on, CW
M04 Spindle on, CCW
M05 Spindle off
M06 Tool transfer
M07 Mist coolant on
M08 Flood coolant on
M09 Coolant off
M19 Spindle orient
M30 End of program, rewind
M48 Feedrate override, and spindle override, normal
M49 Feedrate override, and spindle override, bypass to 100%
M-code Compatibility
Considerations